FEYNLAB® HEAL LITE is the solution for hard to maintain dark colored automotive vehicles. With HEAL LITE, washed induced love marks and other light scratches will quickly vanish when the panel is
heated by the sun.
HEAL LITE is a single-step ultra durable coating with excellent UV protection, extreme hydrophobic properties, and contains up to 60% of the healing capability of FEYNLAB® HEAL PLUS.
HEAL LITE was developed with darker colored automotive finishes in mind. Particularly non metallic vehicles which easily reveal most paint defects such as swirl marks and other micro defects.
In addition to the impressive Self Healing Capabilities, HEAL LITE contains hearty UV resistance, rugged chemical protection, Very High Gloss, and the Superb Hydrophobic Properties that FEYNLAB®
coatings are engineered and known for in real world conditions.
To activate healing: simply park the vehicle in direct sun where the temperature is 30°C (85°F) or higher and the Ceramic Polymer Matrix will reset.
Product Benefits: Over the life of the product, a car coated in FEYNLAB® HEAL LITE will show significantly less swirl marks and marring than other professional ceramic
nano coatings on the market (except for FEYNLAB® SELF-HEAL PLUS) due to the recovery properties of the coating.
HEAL LITE contains the same chemistry found in FEYNLAB® HEAL PLUS (60% healing capabilities), and has similar physical properties such as; excellent UV & chemical resistance, brilliant gloss,
and excellent water sheeting (hydrophobic) properties.
The mechanism behind the self healing effect is a memory polymer woven into a ceramic backbone. When heated, the polymer returns to its original state causing the self leveling effect to occur.
FEYNLAB’s true nano technology and bonding chemistry allows for an unparalleled level of protection sincethe formula penetrates further into the existing paint structure than anything else
HEAL LITE is designated only for Professional Use by FEYNLAB™ Approved and Accredited Installers. Do not attempt to apply this product without
Durability, Warranty & Approved Surfaces Warranty Period – 4 yr.
Application includes 1 component layer, reaching an overall film build between 1-2 microns.
APPROVED SURFACES FOR APPLICATION ONLY: – DO NOT apply to unapproved surfaces
Clear-coated painted surfaces (see warranty terms and conditions for approved manufacturers & vehicle types)
Shelf Life: Unopened – 1 year. Opened – Use within 7 days.
HEAL LITE – 30 ml (sufficient to coat one mid-sized vehicle) & one microfiber applicator sponge
Always wear respirator & gloves during application. Ensure application area is free of loose contamination.
Thoroughly clean vehicle using FEYNLAB® PURE WASH. Follow with a topical decontamination clay treatment using FEYNLAB® PRIME. If necessary, use a ferrous iron removal product to remove all
embedded iron deposits. After polishing paint to desired level, remove all polish oils using FEYNLAB® PANEL PREP to ensure optimal bonding and durability of the coating.
Directions Prior to
application place vehicle in a well lit, temperature controlled 10°C-30°C (50°F-85°F), & contamination free environment. Have plenty (6 or more) new microfiber towels, 2 or 3 microfiber
applicators on hand BEFORE application.
Once the vehicle is prepared, it is strongly recommended to tape off and protect all unapproved surfaces. This minimizes the risk of etching by the solvents in FEYNLAB® HEAL LITE on unapproved
surfaces. Avoid these surfaces with HEAL LITE and wipe off immediately if any product accidentally finds these surfaces.
Shake HEAL LITE vigorously for 2 min before use. Open the bottle and allow the coating 1min of air exposure.
HEAL LITE Application Instructions:
Heal Lite may only be applied by certified installers.